Isingeniso
4 1/2 Intshi Yamanzi Well Roller Cone Bit 114mm Steel Tooth Tricone Bit
I-tricone drill bit iwumshini wokubhola odume kakhulu emhlabeni, ungasetshenziswa kabanzi ukumba uwoyela negesi, ukumba izimayini, umthombo wamanzi, izindawo zokuhlola i-geological.I-tricone drill bit yethu ihlukaniswe i-metal sealed drill bit kanye ne-rubber evaliwe yokubhola.
1. Ijethi ye-C-centre ingagwema ukwakheka kwebhola ku-bit, isuse indawo ewuketshezi ngaphansi kwembobo, isheshise ukugeleza okuya phezulu kokusikwa futhi ithuthukise i-ROP.
2. Ama-bearings e-NBR agcwele kakhulu anganciphisa ingcindezi yokuvala futhi athuthukise ukwethembeka kokuvala.
3. Ukuvikelwa kwegeji kuthuthukisa ukukala futhi kwelula ukuphila kancane.
4. Faka umugqa wamazinyo phakathi kwe-taper yangemuva ne-outlet ukuze unqume imbobo futhi uvikele i-taper.
Isiqondiso se-Tricone Bit Choice
| I-IADC | I-WOB(KN/mm) | I-RPM(r/min) | AMAFOMU ESISEBENZAYO |
| 114/116/117 | 0.3~0,75 | 180-60 | Ukwakheka okuthambile kakhulu okunamandla acindezelayo aphansi kanye nokubhoboza okuphezulu, njengobumba, itshe lodaka, ushoki, njll. |
| 124/126/127 | 0.3~0,85 | 180-60 | Ukwakheka okuthambile okunamandla acindezelayo aphansi kanye nokubhola okuphezulu, njengetshe lodaka, igypsum, usawoti, i-limestone ethambile, njll. |
| 134/135/136/137 | 0.3~0.95 | 150-60 | Ukwakheka okuthambile kuye kwamaphakathi okunamandla acindezelayo aphansi kanye nokubhola okuphezulu, okufana ne-shale ethambile emaphakathi, igypsum eqinile, i-limestone ethambile emaphakathi, isihlabathi esithambile esimaphakathi, ukwakheka okuthambile okune-interbed eqinile, njll. |
| 214/215/216/217 | 0.35~0,95 | 150-60 | Ukwakheka okuthambile okumaphakathi okunamandla acindezelayo aphezulu, okufana ne-medium-soft shale, i-gypsum eqinile, i-limestone ethambile ephakathi, isihlabathi esithambile esimaphakathi, ukwakheka okuthambile okunama-interbed aqinile, njll. |
| 227 | 0.35~0,95 | 150-50 | Ukwakheka okuqinile okumaphakathi okunamandla amakhulu okucindezela, okufana ne-abrasive shale, i-limestone, i-sandstone, i-dolomite, i-gypsum eqinile, imabula, njll. |
| Qaphela: Imikhawulo ephezulu ye-WOB ne-RPM kuthebula elingenhla akufanele isetshenziswe kanyekanye. | |||
Isiqondiso se-tricone Bits ChoiceUhlobo lwezinyo lwe-Tricone Bits
Usayizi Webhithi
| Usayizi omncane | Iphinikhodi ye-API REG | Torque | Isisindo | |
| Intshi | mm | Intshi | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
I-Tricone bits Production Line
| Inani elincane le-oda | N/A |
| Inani | |
| Imininingwane yokupakisha | Iphakheji Elijwayelekile Lokulethwa Kokuthunyelwa kwamanye amazwe |
| Isikhathi sokuthumela | 7 izinsuku |
| Imigomo Yokukhokha | T/T |
| Supply Amandla | Ngokusekelwe ku-oda elinemininingwane |
1. Yiziphi izinkonzo esingazinikeza?
Imibandela Yokulethwa Eyamukelwe: FOB, CIF, EXW;
Imali Yenkokhelo Eyamukelwe: USD, CNY;
Uhlobo Lwenkokhelo Eyamukelwe: T/T, Ikhadi Lesikweletu, L/C, Imali;
Ulimi olukhulunywayo: isiNgisi, isiShayina
2. Ungakwazi yini ukunikeza isevisi ye-OEM & ODM?
Yebo, ama-oda e-OEM&ODM amukelekile.
3. Ngingakwazi ukuvakashela imboni yakho?
Siyakwamukela ngokufudumele ukuvakashela imboni yethu!
4. Ingabe uyifektri noma inkampani yokuhweba?
Siyifekthri futhi sine-Export Right.Kusho imboni + yokuhweba.
5. Siyini isikhathi sakho sokulethwa?
A: Imvamisa, isikhathi sethu sokulethwa singakapheli izinsuku ezingama-30 ngemuva kokuqinisekiswa.
6. Ungakwazi yini ukusiza ukuklama imisebenzi yobuciko yokupakisha?
Yebo, sinomklami ochwepheshe wokuklama yonke imisebenzi yobuciko yokupakisha ngokwesicelo sekhasimende lethu.
