9 1/2 Inch Api 7-1 standard integral spiral blade stabilizer,drilling stabilizer

I-Integral Spiral Blade Stabilizer yenziwe nge-AISI 4145H modified alloy steel, futhi ihlangabezana ngokuphelele nemfuneko ye-API Spec 7-1 standard.Ngokuyinhloko isetshenziselwa ukuzinzisa amathuluzi okubhoboza ohlelweni lokubhoboza umgodi.Ingase futhi ihlukaniswe ngezinhlobo ze-Drill String kanye ne-Near-bit.Ngesikhathi senqubo yokukhiqiza yokuqiniswa kwethuluzi Lokubhoboza, ukulandeleka kugcinwa kusukela ekwamukelweni kwempahla eluhlaza kuya ekuqedeni imikhiqizo yokugcina, futhi izinombolo ze-serial zigxivizwa emzimbeni ngamunye wocezu lomsebenzi.Phakathi nenqubo ngayinye yokukhiqiza, ukuhlolwa nokuhlolwa kuyenziwa ukuze kuqinisekiswe ukuthi ucezu ngalunye luyikhwalithi.

Iziqinisi ozikhethela zona:
Sinikeza izinketho ezimbalwa ze-IBS, kuzo zombili izinto zensimbi ye-alloy nezingezona uzibuthe:
I-Spiral Integral Blade Stabilizer;
I-Straight Integral Blade Stabilizer;
I-Non-Magnet Integral Blade Stabilizer;
Uma U-oda Sicela Ucacise:
Usayizi wembobo noma i-blade edingekayo OD;
Inani lama-blade adingekayo (3 noma 4 izitayela ezijwayelekile);
Izindwani eziqondile noma ezivunguzayo;
Uhlobo oluqinile;
Izixhumanisi eziphezulu nezingezansi;
Ububanzi bomzimba buyadingeka;
Isicelo sentambo noma i-Near Bit;
Insimbi ye-alloy noma izinto ezingezona uzibuthe;
Izici ezikhethekile ze-SRG ekuxhumekeni, isithukuthezi sokuntanta njll.

Izici eziyinhloko

1.Sithatha ingot yensimbi evela embonini yensimbi edumile.

2. Lapho bethola impahla eluhlaza, abasebenzi be-HHF be-QC bazofa-isitembu senombolo ye-serial ekhethekile kuzo zombili iziphetho zezinto.

3. Ngemuva kwenqubo ngayinye yokukhiqiza, umnyango we-QC uzokwenza ukuhlola, uzorekhoda umphumela wokuhlolwa futhi ugcine irekhodi ngokwezidingo ze-QMS.

4. Sihlinzeka ngesitifiketi sokugaya, esifaka ikhwalithi yensimbi ye-ingot, impahla yomshini, ukuhlolwa kwe-UT.

1. Izinto:Insimbi engakazibuthe.

2. Izinhlobo:Uhlobo lwe-Drill String kanye nohlobo lwe-Near bit.

3. Izakhiwo zemishini:

a).Amandla Okuqina: ≥120KSI

b).Amandla Okukhiqiza: ≥100KSI

c).Ukuqina: ≥285HB

4. Ukungena kwamagnetic(MPS=1×105/4∏A/m)

a).Isilinganiso: Ur<1.010

b).I-Magnetic Field Gradient: ΔB≤0.05μT

5. Okujwayelekile:I-API Spec 7-1 noma i-SY/T5051-91Standard.

6. Ukuhlola nokuhlola:Lapho kukhiqizwa, ukulandeleka kugcinwa kusukela ekwamukelweni kwezinto ezingavuthiwe kuze kube sekupheleni kwemikhiqizo yokugcina, futhi izinombolo ze-serial zigxivizwa emzimbeni ngamunye wocezu lomsebenzi.Phakathi nenqubo ngayinye yokukhiqiza, ukuhlolwa nokuhlolwa kuyenziwa.