| Umbala | omnyama, Ophuzi | Igama lomkhiqizo | ibhawodi lehange |
| Qeda | Kuyakhanya(Akugqokiwe) | Ukusetshenziswa | Ukuzinza kwe-slope, inqwaba encane, isipikili senhlabathi, ihange ledwala |
| Uhlelo Lokukala | Imethrikhi | Amagama angukhiye 1 | induku yehange |
| I gama le-brand | JCDRILL | Amagama angukhiye 2 | self-drilling induku yehange |
| Okubalulekile | Insimbi | Amagama angukhiye 3 | induku yehange yensimbi enentambo egcwele |
| Ububanzi | R25, R32, R38, R51, T30, T40, T52, T76, T103 | Igama 1 | umshudo wedwala |
| Amandla | Ikhono Lomthwalo Ophakeme | Igama 2 | ibha yehange elingenalutho |
| Okujwayelekile | ISO | Igama 3 | izinti zehange |
Isingeniso
Incazelo Yomkhiqizo Eningiliziwe
| Igama: | Ithuluzi Lobunjiniyela Eliphansi le-R25N Lokuzibhoboza ngokwakho Ihange le-Hex Nut | Isicelo: | Imayini yamalahle, iTunneling, iSlope Foundation kanye nogesi wamanzi |
| Ukwelashwa kwendawo: | I-Hot Dig Galvanized | Okubalulekile: | I-C45/40Cr |
| Uchungechunge: | R25N | Usayizi Wokhiye: | 75 mm |
| Ubude: | 70-90mm | Umbala: | Ngokusekelwe Kumakhasimende |
| Ukukhanya Okuphezulu: | I-R25N Steel Hex Nuts, Amantongomane ensimbi angama-70mm ubude , R25N amantongomane we-hex galvanized | ||
Ithuluzi Lobunjiniyela Eliphansi le-R25N Lokuzibhoboza ngokwakho Ihange le-Hex Nut
Uhlelo lwe-Self Drilling Anchor (SDA) luyisixazululo sokubhowula esinzima senhlabathi kanye nezimo zamadwala.Lolu hlelo luvumela ukumba kanye nokugxusha endaweni eyodwa, okonga kakhulu endaweni yomsebenzi kanye nesikhathi sephrojekthi.Okuhlanganisa i-anchor bar enentambo engenalutho ene-drill bit yomhlatshelo eyenza ukubhoboza, ukunamathisela i-anchoring kanye ne-grouting emsebenzini owodwa.Uhlelo lokuzibhoboza ihange lusetshenziswa kakhulu ekusimamiseni ukuthambeka, ukusekela kusengaphambili umhubhe, izisekelo ezinezinqwaba ezincane njll imisebenzi, esetshenziswa kakhulu kumaphrojekthi ezimayini, emhubheni, kaloliwe, ekwakhiweni kwemetro njll.
Isici:
1. Ukufaka isicelo sakho kokubili ipuleti eline-domed ne-flat plate.
2. Wonke amantongomane adlula amandla okugcina ebha yokukhonkwane yokuzimbela.
3. Ingakwazi ukuhlangabezana nezidingo eziqinile ekucacisweni kwehange.
4. I-hot-dip galvanizing yokuvikela ukugqwala.
I-Anchor Nut
| Imodeli | R25N |
| Usayizi Wokhiye (mm) | 41 |
| Ubude (mm) | 41 |
| Ukuqina (HRC) | 20-30 |
| Uhlobo Lwentambo | R25 |
| Impahla eluhlaza | I-C45/40Cr |
| Iyunithi Yesisindo (kg) | 0.25 |
| Uchungechunge | R25 |
| I-R-Thread-Coupling | ||||
 | Usayizi | I-Dia yangaphandle | Ubude | Isisindo |
| mm | mm | Kg | ||
| R25N | 36 | 150 | 0.6 | |
| R32L | 42 | 145 | 0.8 | |
| R32N/1 | 42 | 160 | 0.85 | |
| R32N | ||||
| R32S/1 | 42 | 190 | 1.02 | |
| R32S | ||||
| R38 | 51 | 220 | 1.7 | |
| R51L | 63 | 140 | 1.2 | |
| R51L | 63 | 170 | 1.7 | |
| I-R5IN | 63 | 200 | 19 | |
| I-R5IN | 63 | 220 | 2 | |
Isithombe
| Inani elincane le-oda | N/A |
| Inani | |
| Imininingwane yokupakisha | Iphakheji Elijwayelekile Lokulethwa Kokuthunyelwa kwamanye amazwe |
| Isikhathi sokuthumela | 7 izinsuku |
| Imigomo Yokukhokha | T/T |
| Supply Amandla | Ngokusekelwe ku-oda elinemininingwane |
